LIQUID LATEX (from 500ml)

Used to produce highly flexible moulds for casting chess pieces etc, the normal process is done by repeat dipping, dries in contact with warm air. Price (click)

ALGINATE fast set Chromatic impression material (500g sachets)

Dental grade alginate impression material, with handy measuring scoop, used to take very quick impressions of masters, plugs, body parts, face etc, of which a plaster replica can be cast, enabling moulds to be made in various materials using the plaster replica as a master.
From mixing to setting time is approx 2 minutes, colour changes occur indicating setting stages.  (price click)

VINAMOLD (from 1kg)

Slabs of rubber requires heating to 170ºC and is then poured over the plug, setting as it cools. A double skin pan or similar principle is needed to avoid overheating when melting. Air bubbles will appear on the rubber surface if moisture is in the plug, prior sealing with polyurethane varnish is recommended.
Moulds no longer required can be cut up, melted and re-used again.
Price (click)

This blend of high quality silicone has been specially developed to enable the home user to make moulds of a very high quality.
Two catalysts both 2% addition, Medium Yellow and fast Red allow optimum control of the process time of the catalysed mixture.
Suitable for various materials including Polyester resin, wax, polyurethane, and plaster type casting.

Also available is a Thixotropic additive added at a rate of  2% to rubber to attain a Butter-on consistency, ideal in cases where the plug is fixed (ceilings, church walls etc)
click HERE to see resin casting taken from this type of mould.

Spec & application info Here
Data sheets are supplied with the product.
To see the results of a mould made from our silicone blend please see the "ladies and greyhounds" pictures in the casting gallery.

Price click