|
Jewellery casting
mould, seven shapes in a high quality polypropylene mould giving long
life and multiple casts, compatible with all our casting resins. Click
picture for larger view. See sample casting in the
gallery |
 |
| Rectangle high
quality polypropylene mould 85x55x25mm holding approx 125ml of resin, giving
multiple casts and ideal for use with all our casting resins makes excellent
paperweight. Click picture for larger view. .Price click |
  |
| Rectangle
80x50x35mm holding approx 150ml of resin and square 50x50x15mm holding
approx 40ml, these P.E.T. plastic moulds can be re-used but care must be
taken not to allow the polyester resins to overheat which can cause
distortion and damage the mould. Click picture for larger view. Price click |
 |
| Oval 110x80x40mm
holding approx 250ml of resin, made from P.E.T. plastic can be re-used many
times provided the polyester resin is poured in layers which assists in
keeping the heat build up to a minimum, overheating will cause distortion
and damage to the mould. Click picture for larger view. Price click. |
 |
| Dome 75mm diameter
by 35mm deep holding approx 100ml and flat dome 75mm diameter by 15mm
holding approx 50ml, made from P.E.T. plastic can be re-used many times
provided the polyester resin is poured in layers which assists in keeping
the heat build up to a minimum, overheating will cause distortion and damage
to the mould. Click picture for larger view. Price click |
 |